Mr Dawe's Centurion.

Forum for discussion relating to the Centurion
Post Reply
Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

Testing, it's taken me 1\2 an hour to get this loaded! I can't write anything interesting as I keep getting logged out!
Attachments
IMG_20220210_163904.jpg
IMG_20220210_164806.jpg
IMG_20220210_164817.jpg
IMG_20220210_164826.jpg
IMG_20220210_165140.jpg
IMG_20220210_165151.jpg
IMG_20220210_165200.jpg
Last edited by Phil Woollard on Thu Feb 10, 2022 6:55 pm, edited 5 times in total.
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

User avatar
Armortek
Site Admin
Posts: 2876
Joined: Tue Jul 10, 2007 10:30 am
Location: Winchester, England
Been liked: 3379 times

Re: Mr Dawe's Centurion.

Post by Armortek »

Phil, sorry for your problems but as per our email from yesterday, the issue is not on our end.
As you indicated, your old tablet works fine with our site, but your new one does not -that indicates a configuration error or setting on your new machine and not with our forum.

Kian
Armortek

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

It's driving me crazy and it's getting worse!
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Derek Attree
Posts: 1272
Joined: Thu Jul 12, 2007 12:44 pm
Location: london
Has liked: 218 times
Been liked: 178 times

Re: Mr Dawe's Centurion.

Post by Derek Attree »

Hi Phil
I am having the same problem on my Samsung phone accessing the site.
Its since the rebuild after the site was down a couple of weeks back, it works fine on my desk top and Macbook.
I cleared cookies and cashe made no difference.

Regards

Derek
we must stop making stupid predictions

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

hi Derek.
I've tried everything, I would imagine that the site security is a lot tighter now I could be wrong, I have no issues with any other site.
I'm so glad I kept this older device as its seems to work just fine!
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

Back to my old device with a crappy camera. So that's two of the six suspension units finshed, just the other four to detail now and they have the dampers..
Attachments
IMG_20220211_141122.jpg
IMG_20220211_142147.jpg
The bump stop plates made and fitted.
The bump stop plates made and fitted.
Thats the rubber you sent me Phil.
Thats the rubber you sent me Phil.
IMG_20220211_163838.jpg
Working rubber bump stops.
Working rubber bump stops.
IMG_20220211_164735.jpg
Done!
Done!
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

More of the same and even more to come for now but the boss likes to see the progress
Attachments
IMG_20220214_142746.jpg
Now onto the four suspension units that have the dampers
Now onto the four suspension units that have the dampers
Lots of detail to add to these.
Lots of detail to add to these.
IMG_20220214_151106.jpg
IMG_20220214_161416.jpg
IMG_20220214_161853.jpg
IMG_20220214_171659.jpg
IMG_20220214_171709.jpg
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

The dampers for the suspension units..
Attachments
Dont know why this arm was at this angle
Dont know why this arm was at this angle
This arm had been bent out of shape so needed some work, a new angle was required on this piece anyway
This arm had been bent out of shape so needed some work, a new angle was required on this piece anyway
Lots of material to remove here.
Lots of material to remove here.
IMG_20220215_142511.jpg
Extension pieces for the pivot shafts
Extension pieces for the pivot shafts
Pivot shaft detail
Pivot shaft detail
Plunge cutting the compound angle for the oil fillers, you shouldn't really use an end mill for this but these have overlapping flutes so it removed the material just fine.
Plunge cutting the compound angle for the oil fillers, you shouldn't really use an end mill for this but these have overlapping flutes so it removed the material just fine.
Checking the final drive has clearance.
Checking the final drive has clearance.
One half done.
One half done.
And now to the other end which has a slightly different oil filler position to also include an access cover.
And now to the other end which has a slightly different oil filler position to also include an access cover.
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

I can't load photos now, it's worse than ever!
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

For Phil.
Attachments
IMG_20220217_170045.jpg
IMG_20220217_170058.jpg
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Derek Attree
Posts: 1272
Joined: Thu Jul 12, 2007 12:44 pm
Location: london
Has liked: 218 times
Been liked: 178 times

Re: Mr Dawe's Centurion.

Post by Derek Attree »

Hi Phil
Loving what you are doing to this model.
Keep up the good work.

Regards

Derek
we must stop making stupid predictions

Phil Dawe
Posts: 290
Joined: Sat Aug 30, 2014 5:49 pm
Has liked: 755 times
Been liked: 276 times

Re: Mr Dawe's Centurion.

Post by Phil Dawe »

I thought the storm would have kept you out of the workshop Phil! I see what you mean about the coil springs!

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

The storm kept me out the workshop Phil as we had power outs over three days! Back in there now.
Moving on with the suspension units, the more I research the more detail I find .
Attachments
IMG_20220221_153553.jpg
I don't have the luxury of cnc but I do have Phil N C .
I don't have the luxury of cnc but I do have Phil N C .
IMG_20220221_154823.jpg
The only way to get the stub axles out is with some heat.
The only way to get the stub axles out is with some heat.
Carefully following the lines with the x and y axis.
Carefully following the lines with the x and y axis.
IMG_20220221_155952.jpg
IMG_20220221_160134.jpg
IMG_20220221_160743.jpg
IMG_20220221_160956.jpg
IMG_20220221_170154.jpg
IMG_20220221_170201.jpg
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Phil Woollard
Posts: 4268
Joined: Mon Mar 01, 2010 4:48 pm
Location: Cornwall
Has liked: 2259 times
Been liked: 7149 times

Re: Mr Dawe's Centurion.

Post by Phil Woollard »

For those that are interested.
Attachments
We had no plans to take the hull down to this extent but needs must to get a good finish.
We had no plans to take the hull down to this extent but needs must to get a good finish.
With a bit of elbow grease and all is smooth ready for the armour plate stippling effect.
With a bit of elbow grease and all is smooth ready for the armour plate stippling effect.
Weld worms
Weld worms
IMG_20220223_141747.jpg
Smooth as a babies arse.
Smooth as a babies arse.
IMG_20220223_145753.jpg
IMG_20220223_145800.jpg
IMG_20220223_161308.jpg
More detail than this?
More detail than this?
And now to the nr side.
And now to the nr side.
My afternoon box.
My afternoon box.
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.

Phil Dawe
Posts: 290
Joined: Sat Aug 30, 2014 5:49 pm
Has liked: 755 times
Been liked: 276 times

Re: Mr Dawe's Centurion.

Post by Phil Dawe »

Loving it all Phil! Did you have problems with paint runs in the original sand colour paint that required a lot of rubbing back? A bit more space in the workshop now the Rolls Royce AC has finally arrived here!

Post Reply