Universal Carrier Nr 34

Graham P Hough · Post by **Graham P Hough** » Sun May 16, 2021 7:29 pm

Hopefully the set up for the twin motors. I have made bearing for the end of the motor gearbox and the axles. Will be setting up electronics with my son soon so as to test out the how it drives. In theory it should have twice the power? Well will see.

Derek Attree · Post by **Derek Attree** » Mon May 17, 2021 9:53 am

Hi Graham
Another neat solution to fitting 2 motors....

I love the things people do on here.

Regards

Derek

Tim Page · Post by **Tim Page** » Mon May 17, 2021 12:08 pm

It will be really interesting to see how the various twin motor setups compare.
Tim

Graham P Hough · Post by **Graham P Hough** » Sat May 22, 2021 5:31 pm

You wouldn't think they were the same scale. Tiger 1 and Universal Carrier tracks.

Graham P Hough · Post by **Graham P Hough** » Tue Jul 06, 2021 9:52 am

Latest version of my twin motor drive is now to use 6mm chain drive. I found that the belt drive required accurate alignment of the pulley shafts otherwise the belt wanders off the pulleys. All electrics working now thanks to my son Sam.

Graham P Hough · Post by **Graham P Hough** » Wed Aug 25, 2021 8:07 pm

Hi
Just to conform that the two standard Armortek motors, 6mm roller chain and 6mm steel sprocket 14T and 6mm steel sprocket 25T are strong enough to drive over most obstacles and tow my Armortek 25pdr and limber. A simple system that works. Control is via two of the Armortek speed controllers.

Universal Carrier Nr 34

Re: Universal Carrier Nr 34

Re: Universal Carrier Nr 34

Re: Universal Carrier Nr 34

Re: Universal Carrier Nr 34

Re: Universal Carrier Nr 34

Re: Universal Carrier Nr 34