2025 ARMORTEK KIT SURVEY

Over the last few years we have brought out a whole series of kits as a direct result of your feedback - kits like the Pershing, JagdPanther, Hetzer, Leopard 2A4, and more recently the Sd Kfz 7, 88mm Flak 36 and the upcoming Challenger 2.

So, in keeping with what has become and annual tradition, here is your opportunity to once again influence our future production plans.

We have added in some "guide pricing" next to the names of the models. This is a rough estimate of the price at the current rates.

Thanks in advance for your input and we look forward to the results.

UC ER0123 and ER0124

Forum for discussion relating to the Universal Carrier
Post Reply
Bob Butts
Posts: 44
Joined: Fri Jan 15, 2021 9:43 am
Has liked: 12 times
Been liked: 7 times

UC ER0123 and ER0124

Post by Bob Butts »

Hi Guys

Another question from a newbie.

If you look at the attached photo you will see that I screwed down ER0125 and the girder bent because there is a gap between the girder and the plate.

Should I use a couple of washers/spaces and a bigger screw.

Many thanks

Bob
IMG_0439.jpg
Top
Graham P Hough
Posts: 180
Joined: Sat Oct 24, 2020 8:51 pm
Has liked: 26 times
Been liked: 193 times

Re: UC ER0123 and ER0124

Post by Graham P Hough »

Bob it may be worth easing off the larger part as they bolt together to see if something is out of line. I checked on mine and I don't have such a 'step' on mine. Always better to see if you can adjust the parts before you alter the instructions.
Top
Bob Butts
Posts: 44
Joined: Fri Jan 15, 2021 9:43 am
Has liked: 12 times
Been liked: 7 times

Re: UC ER0123 and ER0124

Post by Bob Butts »

Many thanks for your wise advice Graham as I have managed to force it up a bit.
all the best
Bob
Top
Post Reply

Return to “Universal Carrier”