Its starting to look a lot like a Carrier. Almost finished the body bolt together and have enough to size up and start making some of the interior parts. I can't comment on the running gear yet but this has been one of the easiest metal builds I have done and apart from filing a couple of laser tags this has all been done with Allen keys and nut spinners plus plenty of scratches which is a normal part of me and anything metal
All the holes have lined up and looks to be the same for the many rivets I will eventually have to fit. I have not had to ease any locations. As suggested by Adrian I bolted together loosely then tightened once all the main bits were in the right place.I won't go too much further with the body until I have made all the masters for new parts as may need to remove the odd bit. I would also rather wait for the motion packs before final assembly. Looking through the various drawings, pics and books I have the only area I may be modifying the metal is the Front armour around the Bren opening. Everything else I think is going to be an add on.
Best regards
Dave
