Chieftain build by Phil Woollard.

Phil Woollard · Post by **Phil Woollard** » Tue Apr 14, 2020 10:22 am

Cool let's give it a go Vince and see what happens?

Got it, now just to wait for a shortened version of the hesh to finish printing and I'll give it a go.

Vince Cutajar · Post by **Vince Cutajar** » Tue Apr 14, 2020 10:31 am

Phil
I was going to do ammo container (shortened) according to your diagram but you did not specify the length of the container. I was going to the single and I guess if you wanted a double you could glue two singles on top of each other. What do you think?

Vince

Phil Woollard · Post by **Phil Woollard** » Tue Apr 14, 2020 10:48 am

I reckon 50mm for the shortened container, and yes I can make up multiples of to get the different sizes for the various turret stowage areas.

Do you reckon you could produce a shortened charge bag container from this photo, those holes would be around 120mm? Shortened to 50mm again or I won't get it to fit on the turret basket?

Vince Cutajar · Post by **Vince Cutajar** » Tue Apr 14, 2020 11:08 am

Made 3 sizes of electronics panels. Left the fine details in your capable hands.

Vince

Phil Woollard · Post by **Phil Woollard** » Tue Apr 14, 2020 11:52 am

Wonderful!

I'm having trouble with the printer right now, the bed temperature is fluctuating but I'm getting there!

Vince Cutajar · Post by **Vince Cutajar** » Tue Apr 14, 2020 12:45 pm

Some more ammo containers.

Vince

Phil Woollard · Post by **Phil Woollard** » Tue Apr 14, 2020 1:35 pm

Superb!

just sending the breech for you to peruse.

Vince Cutajar · Post by **Vince Cutajar** » Tue Apr 14, 2020 1:47 pm

Just did this:

50 mm long. Not sure about the covers. They seem to be hinged transparent covers.

Vince

Vince Cutajar · Post by **Vince Cutajar** » Tue Apr 14, 2020 2:08 pm

Phil, received the line drawing of the breach. As I have never seen a breach in real life I am trying to make sense of it. Hopefully I will eventually get there. Regarding the front face of the breach, how do you intend to fix it to the Armortek barrel?

Vince

Phil Woollard · Post by **Phil Woollard** » Tue Apr 14, 2020 2:15 pm

I'll send you some photos of the real thing! Boy it's been a busy day, big thank you to Vince, his cad work is just great. I'm tweaking the settings on this 3d printer and it's printing better and better, you have to dive right in and change the settings until it's producing a quality product.

Stephen White · Post by **Stephen White** » Tue Apr 14, 2020 2:37 pm

Any help? Keep up the good work.

: CHARGE BIN.jpg (37.08 KiB) Viewed 423 times

Phil Woollard · Post by **Phil Woollard** » Tue Apr 14, 2020 2:51 pm

Just great Stephen, they are beautiful drawings. Vince ref the triangular bin, that looks fine, I can tweak the length on the software this end.

Vince Cutajar · Post by **Vince Cutajar** » Tue Apr 14, 2020 2:58 pm

OK. That's great. Surprised the filament crossed that gap without support.
Thanks Stephen. I can imagine it better now. Never seen one in real life so was a bit not sure about how to go about it.

Vince

p.s. Must be running out of filament by now.

Vince Cutajar · Post by **Vince Cutajar** » Tue Apr 14, 2020 3:54 pm

Progress so far on the breach.

Vince

Kevin Hunter · Post by **Kevin Hunter** » Tue Apr 14, 2020 4:10 pm

The pace of these CAD drawings and subsequent printing is quite breath taking. As are the results.
Great work guys.

Kevin

Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.

Re: Chieftain build by Phil Woollard.