CHALLENGER 2 PRE-ORDERS
OPEN ON THE 6TH FEB 2025


battery voltage

Forum for Armortek Owners to Meet, chat and share knowledge. You are advised to check 'official advice' before carrying out any modifications.
Post Reply
colin fairweather
Posts: 253
Joined: Fri Aug 17, 2007 4:34 pm
Location: athlone rep of ireland
Been liked: 9 times

battery voltage

Post by colin fairweather »

hi all

after running my tigger for about an hour or so today i checked the voltage of both batts each and then linked which i dont normally do and found something odd or maybe not i'm not sure :? , one read 12+volts and the other 7+volts, then linked they read 19+volts at the motors this is not right is it ? shorley the batts should run down evenly together, i have noticed she runs slower than she did 4+mph. speed controllers are set at full. :?

any ideas

thanks

colin

leesellars
Posts: 934
Joined: Thu Jul 12, 2007 11:19 am
Location: Nottingham
Has liked: 2 times
Been liked: 15 times

Post by leesellars »

Hello Colin

It sounds like you have a duff battery.Try puuting a full charge on both and then check the voltage after a week.

Lee
http://www.Facebook.com/newthorpemodels
Dont hit me so early in the morning with those negative waves.
Listen carefully i shall say this only once.
If its not broke dont fix it.
Ich Hatt Einen Kameraden

colin fairweather
Posts: 253
Joined: Fri Aug 17, 2007 4:34 pm
Location: athlone rep of ireland
Been liked: 9 times

Post by colin fairweather »

thanks lee

i'm starting to think that myself :( will charge them up first then run them down and charge again to see what happens, i dont know why only one battery is running down though, :? but i still have runnung voltage at the motors 19+v :?

thanks

colin

Post Reply