Looking for 1/6th buckles that i can run canvas and leather straps through for holding shovels, ropes, cases... whatever. Figure-8 style.
Need about 20.
Cheers,
RPR
buckles for holding down tools, etc.
-
Robert Reid
- Posts: 584
- Joined: Mon Oct 09, 2017 9:49 pm
- Has liked: 99 times
- Been liked: 446 times
-
Derek Attree
- Posts: 1305
- Joined: Thu Jul 12, 2007 12:44 pm
- Location: london
- Has liked: 219 times
- Been liked: 199 times
Re: buckles for holding down tools, etc.
Hi Robert
Try Dave Dibbs at Armorpax
Regards
Derek
Try Dave Dibbs at Armorpax
Regards
Derek
we must stop making stupid predictions
-
Chris Hall
- Posts: 769
- Joined: Mon Jan 12, 2015 12:34 pm
- Location: Devizes, Wiltshire, UK
- Has liked: 530 times
- Been liked: 682 times
Re: buckles for holding down tools, etc.
Robert -
Tony Barton's site (www.antheads.co.uk) is a Mecca for 1/6th scale uniform bits. The buckles he recommends are in etched brass from Rich Elbourne. Details can be found half-way down this link: http://www.antheads.co.uk/catguide/webbing
I've got a set, and they're great !
Hope this helps,
Chris
Tony Barton's site (www.antheads.co.uk) is a Mecca for 1/6th scale uniform bits. The buckles he recommends are in etched brass from Rich Elbourne. Details can be found half-way down this link: http://www.antheads.co.uk/catguide/webbing
I've got a set, and they're great !
Hope this helps,
Chris
Mark IV (Liesel, Abteilung 14, France 1918)
M3 Lee (25 Dragoons, Burma 1944)
Universal Carrier (2/Wiltshires, Italy 1944)
Panther (Deserter, 145 RAC, Italy 1944)
Centurion Mk 3 (8KRIH, Korea 1950/51)
Morris Quad, 25-pdr & limber (45RA, Korea 1951)
M3 Lee (25 Dragoons, Burma 1944)
Universal Carrier (2/Wiltshires, Italy 1944)
Panther (Deserter, 145 RAC, Italy 1944)
Centurion Mk 3 (8KRIH, Korea 1950/51)
Morris Quad, 25-pdr & limber (45RA, Korea 1951)