Florians FAMO build

[michael haerle]

Hello Florian,

I am present with the screws. Take these for 2 Famo Kit. If you have any other optimization projects in this regard, please let me know, I am also part of 2 Famo models.

Let me know how it goes ...

many Greetings
Michael


Hallo Florian,

ich bin bei den Schrauben dabei. Nehme diese für 2 Famo Modelle. Wenn du noch andere optimierungs- Projekte diesbezüglich hast, lass es mich wissen, bin ich ebenfalls für 2 Famo Modelle dabei.

Lass mich wissen wie es weiter geht...

Viele Grüße
Michael

[florian rudolf]

Hallo Miachael,
ich werde einige Schrauben tauschen. Eigentlich alle die man sehen kann. Ich halte dich auf dem laufenden was die Sonderbestellung an geht.

Hello Michael,
I change all screws they you can see at the model. I tlee you if I know how it goes.

[Vince Cutajar]

Hi Florian

Are these M3X6 screws what you are looking for?

https://www.ts-modelldampfmaschinen.de/ ... 8-569.html

Vince

[florian rudolf]

Hi Vince,

yes thats the right one... Thanks allot for the link.

[florian rudolf]

Thats the reason why

[florian rudolf]

Did some work on the body....

[Vince Cutajar]

That size of hex head looks perfect. I don't know if you noticed but the hex heads in the link I sent you are high heads.

Vince

[florian rudolf]

Yes I've seen that. So I'm waiting till Fa. Knupfer tell me if they can make the smal haeds with 6mm or not.
If not than I'll take yours with the high haed.

[Phil Dawe]

Anyone in UK needing small hex head M3 screws should try:-

www.ekpsupplies.com

The made a batch up for me a couple of years ago. Reasonably priced and quick delivery.

[florian rudolf]

The last fiew days I did some woek cross the building instruction.
The front axel will be install easy, but the body is a bit tricky. So it needs some complains with flex
I put the frame with the rivet, before install the side body parts. I did'nt need loctite.

[florian rudolf]

...Evening atmosphere....

[Phil Woollard]

Are you going to round off the front axle pivot frame? I have thought about it. Regards Phil.

[florian rudolf]

Hi Phil,
I also thought about it. I will leave it like this.
1. You hardly see it
2. It's alu and if it gets less stuff, it could break under the strain.
Regards
Florian

[florian rudolf]

I did some more body work jeseterday, an paint the alu ground to finish the frame. Picthures come later.
Bevor I build the load area from the FAMO. The side wals I fixed also with the rivet. It ab litle tricky because the loading floor. On front of the side wals aro no more rivet in spce the side flap. In this space I braze it, so its a good connection to the floor I think.

[florian rudolf]

This weekend I saved the metal against rust. With paint it looks even better...