Famo 18 tonner.
-
- Posts: 75
- Joined: Thu Oct 23, 2014 2:32 pm
-
- Posts: 94
- Joined: Fri Aug 01, 2014 12:06 pm
- Been liked: 12 times
Re: Famo 18 tonner.
Hi all,
The only question is, are we there yet
All the best
Kevin.
The only question is, are we there yet
All the best
Kevin.
Freedom is a privilege that must always be fought for.
- Armortek
- Site Admin
- Posts: 2876
- Joined: Tue Jul 10, 2007 10:30 am
- Location: Winchester, England
- Been liked: 3379 times
Re: Famo 18 tonner.
Gentlemen,
I am the bringer of good news: You have today surpassed the required number of 30 confirmed orders! 31 to be exact.
I am both impressed and amazed by your enthusiasm and relentless Famo chanting skills! Kian will post some further details on our Famo plans in a few days' time and we are looking forward to start the 2018 Famo kit project.
Best wishes to you all,
Monique
I am the bringer of good news: You have today surpassed the required number of 30 confirmed orders! 31 to be exact.
I am both impressed and amazed by your enthusiasm and relentless Famo chanting skills! Kian will post some further details on our Famo plans in a few days' time and we are looking forward to start the 2018 Famo kit project.
Best wishes to you all,
Monique
Armortek
-
- Posts: 94
- Joined: Fri Aug 01, 2014 12:06 pm
- Been liked: 12 times
-
- Site Admin
- Posts: 3109
- Joined: Sat Oct 11, 2008 7:05 pm
- Location: Dorset
- Has liked: 1022 times
- Been liked: 2091 times
- Contact:
Re: Famo 18 tonner
FAMO = Finally Achieved Model Orders
Well done all, it must be one of the longest and most dogged of campaigns and an enlightened response from Armortek. As far as I can see, Chang started the ball rolling in Jun, 2009. Perhaps he deserves 001?
Stephen
Well done all, it must be one of the longest and most dogged of campaigns and an enlightened response from Armortek. As far as I can see, Chang started the ball rolling in Jun, 2009. Perhaps he deserves 001?
Stephen
- Chang
- Posts: 1073
- Joined: Mon Jul 21, 2008 1:45 am
- Has liked: 15788 times
- Been liked: 424 times
Re: Famo 18 tonner.
Not sure who was the first FAMO ball-roller. But I am glad the ball is finally rolling!
Last edited by Chang on Thu Nov 23, 2017 4:05 pm, edited 1 time in total.
------------------------------------------------------------------
Es braust unser Panzer im Sturmwind dahin.....
Es braust unser Panzer im Sturmwind dahin.....
-
- Posts: 4268
- Joined: Mon Mar 01, 2010 4:48 pm
- Location: Cornwall
- Has liked: 2259 times
- Been liked: 7147 times
Re: Famo 18 tonner.
Maybe the first batch could be refered to as "the people's revolutionary special edition" solidarity brother!
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
- Steve Lewington
- Posts: 338
- Joined: Tue Aug 26, 2008 7:46 pm
- Location: Aberdeenshire
- Has liked: 8463 times
- Been liked: 277 times
Re: Famo 18 tonner.
Good afternoon gentlemen
A great big thank you and well done to us all for making this fantastic kit happen,
Most of all a big thank you to Monique and Kian for all there support and believing in us few who have wonted this baby for so long.
All I can say is yes ho yes HO YESSS .
Have a great day all.
Steve
A great big thank you and well done to us all for making this fantastic kit happen,
Most of all a big thank you to Monique and Kian for all there support and believing in us few who have wonted this baby for so long.
All I can say is yes ho yes HO YESSS .
Have a great day all.
Steve
There is no time for peace.
No respite.
No forgiveness.
There is only ......WAR.
SdKfz 7 Half Track, 88mm Flak 36, Panzer III, TIGER I Mid 2010, Panzer iv, Sdkfz251, Famo ,Chech Hedgehog x2
Ammo limber, 25 pounder, Baily Bridge.
No respite.
No forgiveness.
There is only ......WAR.
SdKfz 7 Half Track, 88mm Flak 36, Panzer III, TIGER I Mid 2010, Panzer iv, Sdkfz251, Famo ,Chech Hedgehog x2
Ammo limber, 25 pounder, Baily Bridge.
- Chang
- Posts: 1073
- Joined: Mon Jul 21, 2008 1:45 am
- Has liked: 15788 times
- Been liked: 424 times
Re: Famo 18 tonner.
Don't let the thread be too quiet. Found a beautiful exploded diagram of the FAMO:
Last edited by Chang on Sat Nov 25, 2017 1:39 pm, edited 1 time in total.
------------------------------------------------------------------
Es braust unser Panzer im Sturmwind dahin.....
Es braust unser Panzer im Sturmwind dahin.....
-
- Posts: 4268
- Joined: Mon Mar 01, 2010 4:48 pm
- Location: Cornwall
- Has liked: 2259 times
- Been liked: 7147 times
Re: Famo 18 tonner.
Nice diagram Chang, I am hoping that mark will consider leaving the engine bay empty for us to insert an engine, I would think that the option packs could live behind all that tin work somewhere, it's plenty big enough! Phil.
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
-
- Posts: 4268
- Joined: Mon Mar 01, 2010 4:48 pm
- Location: Cornwall
- Has liked: 2259 times
- Been liked: 7147 times
Re: Famo 18 tonner.
The Famo, what variants/ variant will Armortek consider making for us?
Could we have a choice of say an artillery tractor a towing variant and maybe the recovery variant with spade, there's not much difference in the tin work? The tilt/tilts depending on the variant would be a must as part of the kit.( the towing Version late, had front and rear canvases).
I would think that the Wheatcroft Famo would be the most convient to go and measure up. the front tyres don't look quite right to me regarding that example, a tad to small or is it just an illusion? The big balloon tyres look so cool.
No doubt Dave is already pondering which detail upgrades Armorpax will offer, the sooner the better for me as I shall super detail the beast inside and out, Dave a basic engine would be great to, and if we get a maintenance vehicle a fully equipped workshop option would be wonderful !
Please keep us up to date with your thoughts Armortek it's very important , I predict this Famo release will be nearly as big as the Tiger 1 has been, regards Phil.
Could we have a choice of say an artillery tractor a towing variant and maybe the recovery variant with spade, there's not much difference in the tin work? The tilt/tilts depending on the variant would be a must as part of the kit.( the towing Version late, had front and rear canvases).
I would think that the Wheatcroft Famo would be the most convient to go and measure up. the front tyres don't look quite right to me regarding that example, a tad to small or is it just an illusion? The big balloon tyres look so cool.
No doubt Dave is already pondering which detail upgrades Armorpax will offer, the sooner the better for me as I shall super detail the beast inside and out, Dave a basic engine would be great to, and if we get a maintenance vehicle a fully equipped workshop option would be wonderful !
Please keep us up to date with your thoughts Armortek it's very important , I predict this Famo release will be nearly as big as the Tiger 1 has been, regards Phil.
- Attachments
Mechanical engineer.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
2 Youtube channels, Phil Woollard and Magpiespyro. Facebook/ Phil Woollard.
Commission builds considered. Pm for my email.
-
- Posts: 40
- Joined: Thu Nov 20, 2008 4:34 pm
- Location: Germany, Rheinland-Pfalz
- Has liked: 40 times
- Been liked: 29 times
Re: Famo 18 tonner.
My personal favorite is the transport version.
I like these and it´s best to pull my Pak 43/41.
If I may vote, then this please.
Kind Regards
Timo
I like these and it´s best to pull my Pak 43/41.
If I may vote, then this please.
Kind Regards
Timo
Regards Timo
Manchmal muss man auch gegen den Strom schwimmen!
Manchmal muss man auch gegen den Strom schwimmen!
- Chang
- Posts: 1073
- Joined: Mon Jul 21, 2008 1:45 am
- Has liked: 15788 times
- Been liked: 424 times
Re: Famo 18 tonner.
Thanks Timo for photos of the transport version.
Just my thought, not necessary correct, that this version will be the one released.
From this photo I can see three areas are either different with or missing from the machine shown in war-time photo. Beside the not-so-obvious different tyres. Wonder the 1/6 model will be rectified or stick on these areas?
BTW Timo, Could you please telling us how to post a larger size photo like you did?
Kind regards,
Lerh Chang
Just my thought, not necessary correct, that this version will be the one released.
From this photo I can see three areas are either different with or missing from the machine shown in war-time photo. Beside the not-so-obvious different tyres. Wonder the 1/6 model will be rectified or stick on these areas?
BTW Timo, Could you please telling us how to post a larger size photo like you did?
Kind regards,
Lerh Chang
------------------------------------------------------------------
Es braust unser Panzer im Sturmwind dahin.....
Es braust unser Panzer im Sturmwind dahin.....
-
- Posts: 40
- Joined: Thu Nov 20, 2008 4:34 pm
- Location: Germany, Rheinland-Pfalz
- Has liked: 40 times
- Been liked: 29 times
Re: Famo 18 tonner.
Hello Chang,
please. And sorry, this FAMO is a late version. When i reserce it right, it gave three versions and this is a later version. But on the site
from where the pictures are, they say that this FAMO is not 100% correct restored. But what is not correct, i don´t know it.
I look in the book what i have from the FAMO and i found these pictures.
I load these pictures with abload.de and use direktlink für Foren and so i get this big pictures.
but i decrese them of 800x450 for 16:9 that´s it.
I hope I could answer you the questions.
But my english is not the best.
Regards Timo
please. And sorry, this FAMO is a late version. When i reserce it right, it gave three versions and this is a later version. But on the site
from where the pictures are, they say that this FAMO is not 100% correct restored. But what is not correct, i don´t know it.
I look in the book what i have from the FAMO and i found these pictures.
I load these pictures with abload.de and use direktlink für Foren and so i get this big pictures.
but i decrese them of 800x450 for 16:9 that´s it.
I hope I could answer you the questions.
But my english is not the best.
Regards Timo
Regards Timo
Manchmal muss man auch gegen den Strom schwimmen!
Manchmal muss man auch gegen den Strom schwimmen!