Tiger 1 shells required

[andyquirot]

Hi all.
Hope chrismas was good for all. Andy have a good new year.
Now to the point i would like to have a go at 3D Printing some 88mm shells for my tiger has any body out there got a stl file for the shells they are willing to share with me.
Regards Andy Quirot

[John Heath]

Hi

Been looking for a decent file myself. There is this one conmmercialy available at $20.30 though. Bit pricy for the file but looks to be pretty good and there is an .stl file available.

https://www.cgtrader.com/3d-models/weap ... 88mm-shell

John

[andyquirot]

Ok its still good valule if i can print 6 or so. I will let you know. Thanks
Regards Andy Quirot

[andyquirot]

Thanks for that John
I have down loaded the file and split it into bits i will have a go at printing 1 shell tonight. I dont supose you know how long the real shell is fron base to tip.
Regards Andy Quirot

[Walter Mackinnon]

Hi Andy.
The copy of the one that I have is 86CM OVERALL AND THE CASE IS 56CM long, I hope this is of use to you.

Regards Walter

[andyquirot]

Thanks Walter.
Perfect i will devide by 6 and print that size.
Regards Andy Quirot

[John Heath]

Hi Andy

Will be interested to see how they come out. If they're good will buy the file myself and give it a go.

Will measure an 88 HE and AP round in the morning and confirm the overall length.

John

[John Heath]

Hi Andy

Finally got round to measuring the shells.

The HE is 923mm and the AP is 880mm. And the casing is 570mm.

John

[andyquirot]

Perfect thank you John.
Regards Andy Quirot