Gun elevation problem

[Chris glover]

Hi chaps,
I seem to have a bit of an issue where the gun begins to elevate of its own accord after 30 seconds.I have to pull the stick back and then forward to stop it.
Any ideas?. It appears to be something timing out ,not a loose wire type problem.
Many thanks
Chris

[davidwilkins]

Hi Chris

I do not know if this helps but I did have a similar problem with my Futaba 7c going into a fail safe mode for channel 3, which I use for the left hand track operation. The fail safe kicked in when the battery level dropped to low on the tx, I believe this to help land a radio controlled plane. Mark at armortek advised me to deactivate the fail safe on this channel and I have had no problem since.

Regards

David

[Chris glover]

Ah, I shall have a go at that David !
Thanks
Chris

[Chris glover]

Problem solved!
Thanks David
Chris

[davidwilkins]

Hi Chris,

Glad you got it sorted, but Mark must take credit for solving this I would still be scratching my head if was not for his advice.

Regards

David