Sd.Kfz.7/1 and 20mm Flakvierling 38
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
-
- Posts: 197
- Joined: Mon Mar 19, 2012 7:01 am
- Location: The Netherlands
- Been liked: 3 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Nice work!
____________________________________________________________________________________
Interested in animatronics for your tank? Contact me at westfrontcustoms@gmail.com | See examples at http://westfrontcustoms.nl
Interested in animatronics for your tank? Contact me at westfrontcustoms@gmail.com | See examples at http://westfrontcustoms.nl
-
- Posts: 1258
- Joined: Thu Jul 12, 2007 12:44 pm
- Location: london
- Has liked: 213 times
- Been liked: 158 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Hi Phil
That is coming along very nicely.
Will you have the folding deck panels working with servos and arms?
Derek
That is coming along very nicely.
Will you have the folding deck panels working with servos and arms?
Derek
we must stop making stupid predictions
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Thanks Maarten and Derek
No Derek I will leave it Manual with the latches fastened but it will
operate and stay horizontal.
It will be a bit crowded underneath as it is
Cheers
Phil
No Derek I will leave it Manual with the latches fastened but it will
operate and stay horizontal.
It will be a bit crowded underneath as it is
Cheers
Phil
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
- Adrian Harris
- Posts: 5018
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1308 times
- Been liked: 1523 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Following this thread with interest
There was a cargo '7' at TankFest last year, and I was quite taken with the cargo body on it, rather than the usual troop carrier:
Adrian.
There was a cargo '7' at TankFest last year, and I was quite taken with the cargo body on it, rather than the usual troop carrier:
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Hi Adrian,
Thanks for that
That is a nice example that you spotted there,thanks for posting the photo.
Cam scheme looks good on her aswell.
Cheers
Phil
Thanks for that
That is a nice example that you spotted there,thanks for posting the photo.
Cam scheme looks good on her aswell.
Cheers
Phil
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Some pictures of my rear deck,before I strip back down a bit for my electrics.
-
- Posts: 1258
- Joined: Thu Jul 12, 2007 12:44 pm
- Location: london
- Has liked: 213 times
- Been liked: 158 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Hi Phil
That looks so cool I am following your build closely.
I have been going through my boxes again and will start my
build I hope in the next couple of weeks.
Derek
That looks so cool I am following your build closely.
I have been going through my boxes again and will start my
build I hope in the next couple of weeks.
Derek
we must stop making stupid predictions
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Thanks Derek
I have made the front infill bits for the joint between deck side and
body side which I can fit the front latches to,the rear ones will be on little plates.
have stripped down now and I am confident there is room for all modules to fit.
Just the positioning of the power supply for the start button to be thought out.
Cheers
Phil
I have made the front infill bits for the joint between deck side and
body side which I can fit the front latches to,the rear ones will be on little plates.
have stripped down now and I am confident there is room for all modules to fit.
Just the positioning of the power supply for the start button to be thought out.
Cheers
Phil
-
- Posts: 197
- Joined: Mon Mar 19, 2012 7:01 am
- Location: The Netherlands
- Been liked: 3 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Hi Phil, Nice Work!
Do you also install a smoker?
Do you also install a smoker?
____________________________________________________________________________________
Interested in animatronics for your tank? Contact me at westfrontcustoms@gmail.com | See examples at http://westfrontcustoms.nl
Interested in animatronics for your tank? Contact me at westfrontcustoms@gmail.com | See examples at http://westfrontcustoms.nl
-
- Posts: 2020
- Joined: Sat Dec 12, 2009 3:38 pm
- Location: Sambourne uk
- Been liked: 223 times
Re: Sd.Kfz.7/1 and 20mm Flakvierling 38
Thanks Maarten
Yes I will be fitting the smoker and hopefully one of Adrian's
smoke control sets.
Cheers
Phil
Yes I will be fitting the smoker and hopefully one of Adrian's
smoke control sets.
Cheers
Phil