Shackles & MG 34 Mount

Roger Sleep · Post by **Roger Sleep** » Mon Feb 17, 2014 9:15 pm

Hi does any body advise on where i can purchase shackles for the KT, and a mg 34 mount that fit's on the MG ring
Thanks Rog

Uwe Gerstenmayer · Post by **Uwe Gerstenmayer** » Mon Feb 17, 2014 9:44 pm

Hi Roger,

I bought my shackles, Jack etc.. for my KT from Steve Winstone. Absolutely superb pieces

The MG mount I've seen at Mike Stannard's catalogue where I'll order as well some other bits and pieces for my models

Hope it helps

cheers,

Uwe

Roger Sleep · Post by **Roger Sleep** » Mon Feb 17, 2014 9:49 pm

Hi fellow Tank Builders,
Thank's for the info, will look into contacting them for some prices
Much appreciated Rog

yves mouton · Post by **yves mouton** » Mon Feb 17, 2014 9:56 pm

Hi Roger,

Mike Stannard sells a MG mount
for the shackles Mike Stannard sells them or
Steve Winstone.
best regards Yves

John Fitzsimons · Post by **John Fitzsimons** » Tue Feb 18, 2014 1:28 am

David Dibb, Armorpax, sells an mg mount, White metal, Can be made functional. Cheap.

yves mouton · Post by **yves mouton** » Tue Feb 18, 2014 5:39 pm

Hello John,

The MG mounts that Mike sells are made in brass,
and that is stronger than white metal.
For me it is better in brass than white metal and certainly if
you put a MG in the mount.
regards Yves

John Fitzsimons · Post by **John Fitzsimons** » Tue Feb 18, 2014 8:51 pm

True about the brass versions. Just giving all the options. There is a large price difference. I have two of Mikes brass mounts and they are great. I have also fitted the white metal versions although I modified it with some brass screws to make it functional.

Dave Boller · Post by **Dave Boller** » Tue Feb 18, 2014 10:05 pm

(RE: Roger) Winstone's shackles are in brass. Mike's are White Metal. If you planned on chipping the paint-job for that "real-scratched-metal" look, this might be of consideration. Mike's MG.mount is fully adjustable, like the real-deal, and can be purchased as a kit or assembled. It does not however come with a gurt-sack mount, but which could be purchased separately, or easily scratch-built. The white-metal ones out there, although cheaper, tend to be "single-molded", and would require skillful cutting and drilling modification to get it on a comparable level of functionality. Hope this helps you out. PS. I also do think the white-metal might be a little too soft, and bend easily for this kind of item (MG mount).

Roger Sleep · Post by **Roger Sleep** » Tue Feb 18, 2014 10:39 pm

Thank's all for the input on the post much appreciated
Regards Rog

Roger Sleep · Post by **Roger Sleep** » Wed Feb 19, 2014 6:09 pm

Hi can any body help me get some drawing's and measurement's for the MG Mount that will fit on the King Tiger so i can have a go at scratch building it.
Regards Rog

Shackles & MG 34 Mount

Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount

Re: Shackles & MG 34 Mount