MG34 wiring for led

[Steen Vøler]

hi Guys

I bought a used JagdPanther and looking in the inside this weekend I saw that there was wires attached to the hull MG34, which must mean, that I can get a LED working when firing the MG

So, how should this little feature be connected to my standard Armortek sound/amplifier box

I have the rotary knob on my Futaba 7c transmitter

thanks for helping out here

cheers
Steen

[Adrian Harris]

Hi Steen.

On the amplifier module, at the right hand side, there is a 3 pin plug, next to the volume control.

Wire the LED between the left hand and centre connections on that plug and the LED should light when the machine gun sound is played. LEDs are diodes, so only work one way round, so if it doesn't light, try it with the connections reversed.

This does rely on the TBS5 having been programmed to operate this output when the correct sound is played, but any supplied through Armortek should already be programmed in this way.

Adrian.

[Steen Vøler]

Thanks Adrian - that sounds easy to hook up

cheers
Steen