Hi All
Doing an inventory of a Mid-Tiger kit this week, I'm having trouble locating the Mantlet Tabs for the turret. (I'm not real sure what they look like) If anyone could provide a photo of the Mantlet Tabs CEO484 I would really appreciate it.
Thank you
Jim
Mid Tiger Mantlet Tabs CEO484
-
- Posts: 8
- Joined: Thu Sep 22, 2011 11:49 pm
- Location: Alamogordo, NM
-
- Posts: 257
- Joined: Tue Jan 12, 2010 11:24 am
- Has liked: 7 times
- Been liked: 46 times
Re: Mid Tiger Mantlet Tabs CEO484
Hi Jim
I think they are the brass etchings on the photo etch sheet, along with the engine deck grills. They're mounted between the cone headed bolts and the mantlet proper.
Simon
I think they are the brass etchings on the photo etch sheet, along with the engine deck grills. They're mounted between the cone headed bolts and the mantlet proper.
Simon
-
- Posts: 8
- Joined: Thu Sep 22, 2011 11:49 pm
- Location: Alamogordo, NM
Re: Mid Tiger Mantlet Tabs CEO484
Thanks Simon
What confuses me is that the Turret inventory sheet lists them as a separate item. It seems like I'm missing the 2 tabs from the turret top to the front mantlet. I have all the other turret roof supports that go around the turret itself, I'm just not sure if there are 2 turret roof supports that go from the front of the turret lid to the mantlet (gun).
Thank you
Jim
What confuses me is that the Turret inventory sheet lists them as a separate item. It seems like I'm missing the 2 tabs from the turret top to the front mantlet. I have all the other turret roof supports that go around the turret itself, I'm just not sure if there are 2 turret roof supports that go from the front of the turret lid to the mantlet (gun).
Thank you
Jim
-
- Posts: 257
- Joined: Tue Jan 12, 2010 11:24 am
- Has liked: 7 times
- Been liked: 46 times
Re: Mid Tiger Mantlet Tabs CEO484
Hi Jim.
Hmm, not sure. Best bet, email Mark and Gill: sales@armortek.co.uk they're always very helpful!
Hope that's of some help.
Simon.
Hmm, not sure. Best bet, email Mark and Gill: sales@armortek.co.uk they're always very helpful!
Hope that's of some help.
Simon.
- Adrian Harris
- Posts: 5060
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1365 times
- Been liked: 1564 times
Re: Mid Tiger Mantlet Tabs CEO484
Jim - are you looking at Dale's Mid Tiger turret ?
He added the two "biscuits" on the front of the turret top which fit into slots in the turret front, they're not kit parts.
Adrian.
He added the two "biscuits" on the front of the turret top which fit into slots in the turret front, they're not kit parts.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
Re: Mid Tiger Mantlet Tabs CEO484
Hello Jim,
Here is a picture of the 2 mantlet tabs CEO 484 ( they are in the turret pack 8
Uploaded with ImageShack.us
Hope this helps you
best regards Yves
Here is a picture of the 2 mantlet tabs CEO 484 ( they are in the turret pack 8
Uploaded with ImageShack.us
Hope this helps you
best regards Yves
- Armortek
- Site Admin
- Posts: 2878
- Joined: Tue Jul 10, 2007 10:30 am
- Location: Winchester, England
- Been liked: 3390 times
Re: Mid Tiger Mantlet Tabs CEO484
Hi Jim
The mantlet tab (CE0484) is on the brass etched sheet, along with the wheel tabs and the mesh grills. The parts in Yves' image are the elevation pivots (CE0474) and the front brackets for the roof are CE0480.
As we have mentioned before, specific queries like this are best dealt with by direct e-mail to us, not on the forum as it can cause confusion as here.
Thanks
Mark
The mantlet tab (CE0484) is on the brass etched sheet, along with the wheel tabs and the mesh grills. The parts in Yves' image are the elevation pivots (CE0474) and the front brackets for the roof are CE0480.
As we have mentioned before, specific queries like this are best dealt with by direct e-mail to us, not on the forum as it can cause confusion as here.
Thanks
Mark
Armortek
-
- Posts: 998
- Joined: Fri Nov 06, 2009 7:55 pm
- Location: Belgium
- Has liked: 1 time
- Been liked: 563 times
Re: Mid Tiger Mantlet Tabs CEO484
Sorry Jim,
I made a mistake, the 2 mantlet tabs are on the photo etch sheet,
like Mark said sorry.
these two parts come behind the 6 cone head bolts on the front of the mantlet
best regards Yves
I made a mistake, the 2 mantlet tabs are on the photo etch sheet,
like Mark said sorry.
these two parts come behind the 6 cone head bolts on the front of the mantlet
best regards Yves
-
- Posts: 8
- Joined: Thu Sep 22, 2011 11:49 pm
- Location: Alamogordo, NM