New Build
-
- Posts: 452
- Joined: Tue Jul 05, 2011 2:00 am
- Location: Penrith NSW
- Has liked: 26 times
- Been liked: 103 times
- Contact:
New Build
G'day. with the looming arrival (sept) of my panzer iv the choice of paint scheme, campaign, corp & unit designation is hard. it seems every time you see a build or images you change our mind.
well I've decided on the following:
1. it's going to be afrika corp &
2. will have the turret & hull ballistic shields
so my questions are:
1. where's the best place to get the turret & hull shields
2. where can i get extra jerry cans and 1/6th figurines
3. where can i get info on the afrika corp panzer iv's for color schemes and unit designations.
cheers
well I've decided on the following:
1. it's going to be afrika corp &
2. will have the turret & hull ballistic shields
so my questions are:
1. where's the best place to get the turret & hull shields
2. where can i get extra jerry cans and 1/6th figurines
3. where can i get info on the afrika corp panzer iv's for color schemes and unit designations.
cheers
-
- Posts: 1697
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 1 time
- Been liked: 365 times
- Contact:
Hi Ray,
You can get the jerry cans on ebay. Just search for Dragon jerry cans or soldier story jerry cans, 1/6 jerry cans. They come in SS and wehrmacht.
http://cgi.ebay.co.uk/ST-1-6-German-Jer ... 519543c935
Lee Sellers on the forum keeps a supply of suitable figures and equipment. Newthorpe models.
Lots of Dragon figures on ebay. Also check out modelersloft. I do'nt now much about the africa corp figures available.
Have you considered animatronic figures.
You can get the jerry cans on ebay. Just search for Dragon jerry cans or soldier story jerry cans, 1/6 jerry cans. They come in SS and wehrmacht.
http://cgi.ebay.co.uk/ST-1-6-German-Jer ... 519543c935
Lee Sellers on the forum keeps a supply of suitable figures and equipment. Newthorpe models.
Lots of Dragon figures on ebay. Also check out modelersloft. I do'nt now much about the africa corp figures available.
Have you considered animatronic figures.
- Adrian Harris
- Posts: 4906
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1181 times
- Been liked: 1378 times
Hi Ray.
Regarding your choice, I would have to say that Schurzen were only introduced late in March of 1943 and the DAK surrendered in May 1943, so it's unlikely any of their Panzer IV's were fitted with them.
The DAK was mainly made up of the 15th and 21st Panzer Divisions, so these units should give you a starting point for unit markings and camouflage, though to the best of my knowledge, the DAK didn't use camouflage to any great extent, especially towards the end of the campaign.
Adrian.
Regarding your choice, I would have to say that Schurzen were only introduced late in March of 1943 and the DAK surrendered in May 1943, so it's unlikely any of their Panzer IV's were fitted with them.
The DAK was mainly made up of the 15th and 21st Panzer Divisions, so these units should give you a starting point for unit markings and camouflage, though to the best of my knowledge, the DAK didn't use camouflage to any great extent, especially towards the end of the campaign.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
- Posts: 1697
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 1 time
- Been liked: 365 times
- Contact:
Hi again Ray, I got a really super detailed Dragon 1/35 Panzer IV Ausf H kit to help with detailing.
Here is a link th the kit.
http://modelingmadness.com/scotts/misc/ ... n/6560.htm
It is a help to have a kit like this to check out details such as weld lines, zimmerit. I will also use it to help scale up the side armour. Has some nice paint schemes on the box also. This is the zimmerit version.
It is worth taking your time with the armortek model and adding some detail. When the build start you will see lots of interesting upgrades.
Here is a link th the kit.
http://modelingmadness.com/scotts/misc/ ... n/6560.htm
It is a help to have a kit like this to check out details such as weld lines, zimmerit. I will also use it to help scale up the side armour. Has some nice paint schemes on the box also. This is the zimmerit version.
It is worth taking your time with the armortek model and adding some detail. When the build start you will see lots of interesting upgrades.
- Robert E Morey
- Posts: 2253
- Joined: Wed Jul 18, 2007 12:59 am
- Location: Seattle, WA USA
- Has liked: 103 times
- Been liked: 701 times
-
- Posts: 452
- Joined: Tue Jul 05, 2011 2:00 am
- Location: Penrith NSW
- Has liked: 26 times
- Been liked: 103 times
- Contact:
has anybody used this place http://www.big-tanks-plant.com/
they have schurzen kit for 1/6 panzer 4
cheers
they have schurzen kit for 1/6 panzer 4
cheers
- Adrian Harris
- Posts: 4906
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1181 times
- Been liked: 1378 times
They have been around as long as I've been interested in 1/6th tanks but I've never seen any models on the various forums which have been built or sold by them.
Personally, I would wait and see if one of the usual suspects comes out with a system designed for the Armortek model.
Adrian.
Personally, I would wait and see if one of the usual suspects comes out with a system designed for the Armortek model.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
- Posts: 1697
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 1 time
- Been liked: 365 times
- Contact:
Re: New Build
Saw the big tank site recently and was just about to post link when I noticed Ray found them also. Good price. Might be worth a try.
If interested in any parts used in my builds contact me at johnfitzsimons@msn.com for a price list.
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
-
- Posts: 452
- Joined: Tue Jul 05, 2011 2:00 am
- Location: Penrith NSW
- Has liked: 26 times
- Been liked: 103 times
- Contact:
Re: New Build
i just recieved my 1/35 dragon panzer kit same as you John. Your right about the super detail. Better than the trumpeter bridgelayer. Getting itchy fingers waiting for the p4 to be dispatched. Any ideas when guys.
-
- Posts: 1697
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 1 time
- Been liked: 365 times
- Contact:
Re: New Build
I have collected some interesting books also. Plenty of information to help with making the shurtzen along with some other details. Hope to research this one a bit better than the Tiger 1. It should be an interesting build and the pictures from open day look gpod. I will complete the Tiger first, I hope.
If interested in any parts used in my builds contact me at johnfitzsimons@msn.com for a price list.
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
-
- Posts: 1697
- Joined: Tue Dec 14, 2010 3:11 pm
- Location: IRELAND,Dublin/Meath
- Has liked: 1 time
- Been liked: 365 times
- Contact:
Re: New Build
Looks the Panzer IVs will start rolling off the line soon.
If interested in any parts used in my builds contact me at johnfitzsimons@msn.com for a price list.
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5
http://www.armortek.co.uk/Forum3b/viewt ... f=4&t=4770
https://youtube.com/@16rctankworkshop-y ... TlMwTalnX5