Hello to all on the 222 forum
Can any body tell me the size of the 222 wheels and tires.
Iam building a 250 half track from scratch and i am having difficulty in finding suittable front wheels for it.Iwould need strong wheels and not the resin type because the model will be quit heavy, it was sugested to me that the 222 wheels might be a good solution.The model will be radio controled.
The sizes im looking for are
Out side diameter of tire 135mm
out side diameter of wheel rim 85mm
thickness of tire 35mm
these sizes can vary slightly if it means i can get a tire and wheel that looks good, i know the wheel rim isdifferent on the 250 half track but i should be able to over come this.
regard to all
nick
Help with wheel sizes
-
- Posts: 547
- Joined: Fri Aug 28, 2009 10:08 pm
- Location: South Wales Glamorgan
-
- Posts: 109
- Joined: Wed Jan 06, 2010 11:07 am
- Location: Germany Black Forest
- Been liked: 25 times
-
- Posts: 547
- Joined: Fri Aug 28, 2009 10:08 pm
- Location: South Wales Glamorgan
Help with wheel sizes
Hello Bodo
Thanks for your help the 222 tires seem to be the best option
with a little bit of work they should be ok. Thanks again, it is mutch apreciated.
best wishes nick
Thanks for your help the 222 tires seem to be the best option
with a little bit of work they should be ok. Thanks again, it is mutch apreciated.
best wishes nick
-
- Posts: 1762
- Joined: Fri Jul 13, 2007 4:53 am
- Location: Northern California
- Been liked: 177 times
- Contact:
Hi Nick
Mike Stannard was selling RC-able wheels and tires for the Sdkfz 250. I'm not sure if he still has them available but maybe worth a try. Wheels were turned aluminum with molded urethane tires.
Kind regards
Tim
Mike Stannard was selling RC-able wheels and tires for the Sdkfz 250. I'm not sure if he still has them available but maybe worth a try. Wheels were turned aluminum with molded urethane tires.
Kind regards
Tim
"So long as one isn't carrying one's head under one's arm, things aren't too bad." – Erwin Rommel
-
- Posts: 547
- Joined: Fri Aug 28, 2009 10:08 pm
- Location: South Wales Glamorgan
Help with wheel sizes
Hi Tim
I did look at mike stanards but i think the metal ones were a one of batch
and wouldnt be repeted due to having to order such a large amount from the supplier , it s a real pitty because they are perfect,thanks any way i will try and contact gill and see if they have any spares for sale for the 222.
best wishes
nick
I did look at mike stanards but i think the metal ones were a one of batch
and wouldnt be repeted due to having to order such a large amount from the supplier , it s a real pitty because they are perfect,thanks any way i will try and contact gill and see if they have any spares for sale for the 222.
best wishes
nick