Castellated Nuts

steve winstone · Post by **steve winstone** » Thu May 13, 2010 7:19 pm

Hi All,

I now have the castellated nuts and cones from the caster, the cost of these will be the same as the cones 50p each, and they are retapped to 3mm. There are 2 types which you should be able to see in the photo there is 7 of each type to one tree. I have 700 of each at present. All that are still interested please confirm via email to: steve.winstone@sky.com

Regards
Steve

[img][img]http://i260.photobucket.com/albums/ii37 ... uts005.jpg[/img]

Dale jordan · Post by **Dale jordan** » Thu May 13, 2010 11:43 pm

Can someone with more knowledge , tell me out of the two types of nuts which where used where?? ..Dale

Luca Fossa · Post by **Luca Fossa** » Fri May 14, 2010 6:14 am

Starter plate of our KT and the plate for tension track, if i'm not wrong.

Cheers

Luca

Stephen White · Post by **Stephen White** » Fri May 14, 2010 7:48 am

Good afternoon down under Dale. I posted a list of the Pz III locations - you'll see it if you search on "castle nut quantities".

Best regards

StephenB

Adrian Harris · Post by **Adrian Harris** » Fri May 14, 2010 8:11 am

I guess, now that Steve has done two sorts, we need to know which ones go where

Adrian.

Richie Wignall · Post by **Richie Wignall** » Fri May 14, 2010 10:03 am

Very nice work Steve

I remember well cutting the 10BA nuts for my KT and tiger 1

more ended up on the floor on the last cut with the hacksaw

but got their in the end.

Great work again.

Richie

Stephen White · Post by **Stephen White** » Fri May 14, 2010 10:04 am

Adrian, as far as I can see, on the Pz III, only the type with the milled round top were used. But that's only on the evidence of the Bovvy vehicle so it may not be true of all Pz IIIs.

Stephen

Sarah Frazer · Post by **Sarah Frazer** » Wed May 19, 2010 10:56 am

Hi Guys,

I've just received my Castellated Nuts, Tow Rope & Tow Rope Fittings. I'm very pleased with them

Sarah

Ian Rodney · Post by **Ian Rodney** » Fri May 21, 2010 4:21 pm

Hi All,

I've just received my Panzer III parts from Steve.
Fantastic Head lights, and Tow cables, and Brackets.

Also a nice set of Castellated milled nuts and straight nuts too.

Excellent craftsmanship as usual Steve.

Looking forward to adding these new parts to my Pz III.

Cheers
Ian
from Glasgow, Scotland

Lawrence Godson · Post by **Lawrence Godson** » Fri May 21, 2010 7:13 pm

I'd like to add my comment also .....excellent work on the castellated milled nuts.
Thanks much

Stephen White · Post by **Stephen White** » Fri May 21, 2010 8:12 pm

They are superb. I've just posted some pictures in the Pz III forum and I think they transform the hull. Can't recommend them highly enough. Thanks Steve.

Regards

Stephen

simon_manning · Post by **simon_manning** » Fri May 21, 2010 11:28 pm

i received my castle nuts today, imaginative and effective,the closer you look the more you see,once you've got them you wonder why did'nt i think of them before.well done steve for some lateral thinking.

Dale jordan · Post by **Dale jordan** » Fri Jun 25, 2010 1:45 am

I've just received my PIII tow cable brackets and nuts from Steve , These are so Good !!! . Dale

Martin Diessel · Post by **Martin Diessel** » Fri Jun 25, 2010 2:27 am

In fact, Steves parts ar more than good they are a real dream! Martin

Rick Jensen · Post by **Rick Jensen** » Tue Jul 06, 2010 10:28 am

Hi Guys
Apart from the Panzer III where on the Tiger1, King Tiger and /or Jagdpanther were they used if at all, and which ones go where? Any help would be appreciated.
Regards

Rick Jensen

Castellated Nuts

Castellated Nuts

Castle Nut Quantities