Comet Measurements

Forum for discussion relating to the Comet
Post Reply
robert michael hilton
Posts: 377
Joined: Sat Apr 03, 2010 3:23 pm
Location: Welshpool, Powys

Comet Measurements

Post by robert michael hilton »

I have started to adapt my no longer in use, motorcycle trailer, to transport the Comet, when received and built. Can I have the overall length which includes the gun. I know the tank body is 42.5 inches. Thank you, Mick.

User avatar
Adrian Harris
Posts: 5051
Joined: Thu Jul 12, 2007 10:46 pm
Location: Berkshire (UK)
Has liked: 1363 times
Been liked: 1556 times

Post by Adrian Harris »

The usual dimensions given are 25' 1.5", which scales out in 1/6th to be 50.25".

Adrian.

Matthew Holt
Posts: 5
Joined: Fri Dec 04, 2009 5:14 am
Location: Katy - Texas, USA

Post by Matthew Holt »

Is that with the turret facing aft in the parked position? It seems the barrel wouldn't hang over the back end that much but I could be wrong.

robert michael hilton
Posts: 377
Joined: Sat Apr 03, 2010 3:23 pm
Location: Welshpool, Powys

Comet Measurements

Post by robert michael hilton »

Thank you for your replies, I was considering the option with the gun facing forward....never crossed my mind to reverse the gun. :oops: Good idea, if I am short of space.

If the overall length is 50.25" I can cut the baseboard to suit, with room to spare.
This will be my first Armortek model....the idea would be to show the completed Comet at local vintage rallies,next year. Thank you again..mick

User avatar
Adrian Harris
Posts: 5051
Joined: Thu Jul 12, 2007 10:46 pm
Location: Berkshire (UK)
Has liked: 1363 times
Been liked: 1556 times

Post by Adrian Harris »

> with the turret facing aft in the parked position

Apparently, that way round it measures 21' 6"

All these measurements were taken from websites rather than original documentation so if anyone happens to have corroboration it would be greatly appreciated :D

Adrian.

Stephen White
Site Admin
Posts: 3108
Joined: Sat Oct 11, 2008 7:05 pm
Location: Dorset
Has liked: 1022 times
Been liked: 2091 times
Contact:

Post by Stephen White »

Adrian

I've got copies of the original handbooks and will look at the weekend.

Regards

Stephen

robert michael hilton
Posts: 377
Joined: Sat Apr 03, 2010 3:23 pm
Location: Welshpool, Powys

Comet Measurements

Post by robert michael hilton »

Ok, I will delay cutting the expensive ply, purchased today. The trailer is no longer needed as I sold my New Hudson Autocycle last year. The trailer was newly purchased two years ago and still in good condition. I needed to find a use for it, will make an ideal transporter....thank you for your replies....mick

David Skeldon
Posts: 234
Joined: Thu Jul 12, 2007 8:26 pm
Location: Herts
Has liked: 31 times
Been liked: 304 times

Post by David Skeldon »

Hi,
I read some ware that trailers are not the best thing from tanks as they bounce to much over bumps.


David

robert michael hilton
Posts: 377
Joined: Sat Apr 03, 2010 3:23 pm
Location: Welshpool, Powys

Comet Measurements

Post by robert michael hilton »

Trailers can bounce when unloaded...this one is very heavy and stable.The Comet will have it's own box and padding, with appropiate straps. Thanks for the advice though...mick

Stephen White
Site Admin
Posts: 3108
Joined: Sat Oct 11, 2008 7:05 pm
Location: Dorset
Has liked: 1022 times
Been liked: 2091 times
Contact:

Dimensions

Post by Stephen White »

Robert

Apologies for taking so long to get to my references.

The Comet 1 Handbook quotes the following official figures:

Overall length (gun front) - 301.5 inches

Overall length (gun rear) - 258 inches

Width - 120 inches

Height - 105.75inches

Height to top of turret ring - 66.5 inches

Hope that is of use.

Regards

Stephen

robert michael hilton
Posts: 377
Joined: Sat Apr 03, 2010 3:23 pm
Location: Welshpool, Powys

Comet Measurements

Post by robert michael hilton »

Hello Stephen, thank you for information,I have allowed enough space on the base area, to box the Comet completely. I know these are minor details, my enthusiasm is running away with me at the moment. This is my first Armortek tank and I am itching to start the build....Mick :D

Post Reply