Comet Measurements
-
- Posts: 377
- Joined: Sat Apr 03, 2010 3:23 pm
- Location: Welshpool, Powys
Comet Measurements
I have started to adapt my no longer in use, motorcycle trailer, to transport the Comet, when received and built. Can I have the overall length which includes the gun. I know the tank body is 42.5 inches. Thank you, Mick.
- Adrian Harris
- Posts: 5052
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1363 times
- Been liked: 1557 times
-
- Posts: 5
- Joined: Fri Dec 04, 2009 5:14 am
- Location: Katy - Texas, USA
-
- Posts: 377
- Joined: Sat Apr 03, 2010 3:23 pm
- Location: Welshpool, Powys
Comet Measurements
Thank you for your replies, I was considering the option with the gun facing forward....never crossed my mind to reverse the gun. Good idea, if I am short of space.
If the overall length is 50.25" I can cut the baseboard to suit, with room to spare.
This will be my first Armortek model....the idea would be to show the completed Comet at local vintage rallies,next year. Thank you again..mick
If the overall length is 50.25" I can cut the baseboard to suit, with room to spare.
This will be my first Armortek model....the idea would be to show the completed Comet at local vintage rallies,next year. Thank you again..mick
- Adrian Harris
- Posts: 5052
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1363 times
- Been liked: 1557 times
-
- Site Admin
- Posts: 3109
- Joined: Sat Oct 11, 2008 7:05 pm
- Location: Dorset
- Has liked: 1022 times
- Been liked: 2093 times
- Contact:
-
- Posts: 377
- Joined: Sat Apr 03, 2010 3:23 pm
- Location: Welshpool, Powys
Comet Measurements
Ok, I will delay cutting the expensive ply, purchased today. The trailer is no longer needed as I sold my New Hudson Autocycle last year. The trailer was newly purchased two years ago and still in good condition. I needed to find a use for it, will make an ideal transporter....thank you for your replies....mick
-
- Posts: 234
- Joined: Thu Jul 12, 2007 8:26 pm
- Location: Herts
- Has liked: 31 times
- Been liked: 304 times
-
- Posts: 377
- Joined: Sat Apr 03, 2010 3:23 pm
- Location: Welshpool, Powys
Comet Measurements
Trailers can bounce when unloaded...this one is very heavy and stable.The Comet will have it's own box and padding, with appropiate straps. Thanks for the advice though...mick
-
- Site Admin
- Posts: 3109
- Joined: Sat Oct 11, 2008 7:05 pm
- Location: Dorset
- Has liked: 1022 times
- Been liked: 2093 times
- Contact:
Dimensions
Robert
Apologies for taking so long to get to my references.
The Comet 1 Handbook quotes the following official figures:
Overall length (gun front) - 301.5 inches
Overall length (gun rear) - 258 inches
Width - 120 inches
Height - 105.75inches
Height to top of turret ring - 66.5 inches
Hope that is of use.
Regards
Stephen
Apologies for taking so long to get to my references.
The Comet 1 Handbook quotes the following official figures:
Overall length (gun front) - 301.5 inches
Overall length (gun rear) - 258 inches
Width - 120 inches
Height - 105.75inches
Height to top of turret ring - 66.5 inches
Hope that is of use.
Regards
Stephen
-
- Posts: 377
- Joined: Sat Apr 03, 2010 3:23 pm
- Location: Welshpool, Powys
Comet Measurements
Hello Stephen, thank you for information,I have allowed enough space on the base area, to box the Comet completely. I know these are minor details, my enthusiasm is running away with me at the moment. This is my first Armortek tank and I am itching to start the build....Mick