Panzer III Cone head Bolts

martin pitcairn · Post by **martin pitcairn** » Mon Apr 05, 2010 11:26 pm

I am looking for Cone head bolts, Steve has run out and is waiting for more people to order, so if anyone is looking please order with Steve,

Jim Fowler · Post by **Jim Fowler** » Tue Apr 06, 2010 7:35 am

Martin,

I told Steve I would be interested in obtaining 50 more and got same from him. So, please count me in

Do I need to email Steve again?

Tim Bowman · Post by **Tim Bowman** » Tue Apr 06, 2010 4:14 pm

Hi Martin

I was planning on another 30-40 cone bolts from Steve for my Stug III conversion and a few other projects so add me to the list if it helps.

Kind regards
Tim

Tim Bowman · Post by **Tim Bowman** » Tue Apr 06, 2010 4:15 pm

sorry for the double post. Not sure why I couldn't delete this one though.

Martin Diessel · Post by **Martin Diessel** » Tue Apr 06, 2010 6:36 pm

You can count on me, too. How many I may need on the panzer 3?? Martin

martin pitcairn · Post by **martin pitcairn** » Tue Apr 06, 2010 7:03 pm

jim, i am sure steve will follow the thread. Martin i think you need 87 depending on the model, for example on the L version with the spaced armour on the gun mantle i am not sure if they used nuts and bolts or cone heads.

steve winstone · Post by **steve winstone** » Wed Apr 07, 2010 11:01 am

Hi Martin,
I now have enough orders to order the 500 cones, as soon as they arrive I will let you know. I have made a note of the ones I know of, Jim, Tim,Martin.

Thank you for your response.

Steve

vincent hung shu yue · Wed Apr 07, 2010 4:29 pm

Hello Steve
Count me for 100.

Jim Fowler · Post by **Jim Fowler** » Thu Apr 08, 2010 7:52 am

Thanks Steve!

Now, if I could just find a source for working, 3mm Castle nuts??

steve winstone · Post by **steve winstone** » Thu Apr 08, 2010 9:57 pm

Hi Jim,

I could make up castings for the Nuts, but I would have the same problem as I need a minimum order of 500 for the caster to make it worth his while.

Regards
Steve

Jim Fowler · Post by **Jim Fowler** » Fri Apr 09, 2010 2:55 pm

Steve,

Do you think you can develop and estimated cost? I could use 100 of them, I am confident of that. I am just thinking that with a cost estimation and a posting here specifically asking if others have an interest, the other 400 could be gleened. And, if not, I could see if I could "pad" the balance needed.

Anyone else interested in 3mm, brass Castle Nuts?

David Da Costa · Post by **David Da Costa** » Fri Apr 09, 2010 3:15 pm

I would be interested in castle nuts for my PIII and King Tiger. Not sure how many I would need.

David

Mark Bennett · Post by **Mark Bennett** » Sat Apr 10, 2010 11:06 pm

Steve,

I would also be interested in castle nuts if you decide to cast them. For my KT, Pz III, etc. I would probably order 100.

Mark

Martin Diessel · Post by **Martin Diessel** » Sun Apr 11, 2010 12:55 am

Steve please add also a 100 castle nuts for me!
Martin

Stephen White · Post by **Stephen White** » Sun Apr 11, 2010 4:08 am

Steve

I'd be interested, particularly if they were tapped M3.

Regards

Stephen