JagdPanther G2 Robert 2024

[chris fry]

Hello Robert,
Good idea with the jig, Just be carful with 480 you don't get any glue between the tyre and jig or it will stick them both together, Forever.
Quick question on one or your last posts, The picture with the suspension arms/axles all fitted, is that the angle you have set them all at !!!,
Regards, Chris.

[yves mouton]

Hello Robert,

I use tie straps to secure the rubber rings on the wheels.

Best regards Yves

[Björn Johansson]

Love to read about you´r build here Robert .
Hope to be able to see it in real any day soon

[Robert Tanzer]

Small update on the sprocket wheels.
I had to wait forever for my castle nuts and other hobby screws.

My friend Christoffer A here in Sweden, did help me with making M3 screws with the correct scale head.
These are the ones that hold the brass washer.

After that I made new hubcaps, so that the brass cover plate hides the M3 screw.

Have a nice hobby time to you all.
Robert

[Robert Tanzer]

After looking at many pictures and many books about JagdPanther, I found a small detail I wanted to do on my hubcaps.
Many thanks to my friends who helped me measure the diameter of that hole.
There were a few holes to drill, but it's like therapy to do this.

Have a nice day to you all.
Robert

[Christoffer Ahlfors]

Beautiful hubs!

[Andre Meylan]

Simply amazing ... keep on Robert !!!

Cheers, Andre

[Robert Tanzer]

Thank you for your nice words
Robert T

[Robert Tanzer]

Small update in the wrong order.
I decided to be able to screw my hubcaps on with all the washers.
So I used my lathe to make inserts, and drilled and tapped the holes for the hubcaps.

Have a nice panzer time
Robert T