Tiger 131

[David Brady]

Hi All,

I bought David Wilkins tiger around four years ago. A superb build with many improvements.

A few pictures of some recent work.

Shortly after receiving I fitted the motors, then it sat for four years.

Mike Stannard Loaders hatch fitted.

Mike Stannard early vent fitted

Steve Winstone rear bin with Mike Stannard padlocks.

Steve Winstone tool box

Mike Stannard snow shovel and clips fitted, looking at some original pictures I prefer this position.

Tiger 131 spade location.

DB

[David Brady]

Mike stannard tool clips made today in preparation for swapping out fitted tool clips.

Clips for removal - all tool clips are as pictured.

Mike stannard tool clips

10 pcs assembled

Cheers

[David Brady]

More progress

Tools and clips removed, hammer will be used as this has a steel head, handle length will be reduced a little.

Axe Cover as supplied was to large - I compared this to a Mike stannard one fitted to my Late Tiger - this was reduced in width and length

Spade cover swapped out with a Mike Stannard one

Tim Catton spade reduced/reshaped to fit Mike's head cover, also handle reduced to fit as best as possible.

A selectin of spades from different suppliers, Mike stannard on the left is my personal favourite, reshaped Tim Catton at the back

New tools fitted, Tim Catton spade and Mike Stannard axe and clips.

About right

Steve Winstone bump stops to fit next

Cheers