Tank parts from 1/6 Tank Workshop

[John Fitzsimons]

More progress on my Tiger 1. Let me know if you would like to see any of these components added to the list of parts available. Still lots of work to do on the 88 KwK 37 but making some progress.

[John Fitzsimons]

I recently made a new version of the Tiger 1 front mudguards set. These new parts more closely resemble the fittings of the originals. I am interested to get feedback. Would anybody be interested. There is a lot more work involved so price would be a bit higher.

There is a video on my Early Tiger 1 build on the forum.

viewtopic.php?t=5952&start=45

[simon_manning]

They look nice John, regards simon.

[Steve Lewington]

I have seen lots of your work over the years John.
Outstanding mate as useawell.

Regards

Steve

[Damon Resch]

Nice work John. Best rendition of Tiger 1 front mudguards I've seen, the level of detail is great, well executed.

[John Fitzsimons]

Thanks for the feedback. Thought it was worth a try but a lot of work compared to kit fitting. Fitting on my tiger was awkward. The cutouts in the glassis plate were not uniform in dept. Don’t know if that was just a bad glassis plate or they are all a bit off.

[John Fitzsimons]

Interior parts from 1/6 RC Tank Workshop, Tiger 1.

Commander seat

IMG_8982.jpeg (92.57 KiB) Viewed 491 times

Front hull supports

IMG_8979.jpeg (42.98 KiB) Viewed 491 times

Gurtsac racks

IMG_8992.jpeg (28.86 KiB) Viewed 491 times

IMG_9015.jpeg (32.09 KiB) Viewed 491 times

IMG_9012.jpeg (27.25 KiB) Viewed 491 times

Loaders stowage box

IMG_9022.jpeg (34.63 KiB) Viewed 491 times

MG ammo bix retainers radio operator

IMG_8985.jpeg (31.58 KiB) Viewed 491 times

storage for spare vision port blocks

IMG_9001.jpeg (48.09 KiB) Viewed 491 times

IMG_9023.jpeg (55.29 KiB) Viewed 491 times

Boxes for headphones and flare ammo

IMG_8981.jpeg (41.32 KiB) Viewed 491 times

IMG_8983.jpeg (41.15 KiB) Viewed 491 times

Ammo bin driver position

IMG_9013.jpeg (44.32 KiB) Viewed 491 times

[John Fitzsimons]

IMG_8991.jpeg (50.17 KiB) Viewed 490 times

IMG_8976.jpeg (29.91 KiB) Viewed 490 times

IMG_8977.jpeg (34.38 KiB) Viewed 490 times

IMG_8996.jpeg (36.49 KiB) Viewed 490 times

MP40 rack

IMG_8984.jpeg (41.74 KiB) Viewed 490 times

IMG_8999.jpeg (30.32 KiB) Viewed 490 times

IMG_8989.jpeg (50.82 KiB) Viewed 490 times

IMG_8998.jpeg (52.44 KiB) Viewed 490 times

IMG_9014.jpeg (51.25 KiB) Viewed 490 times

[John Fitzsimons]

Spare periscope holder

IMG_8986.jpeg (86.6 KiB) Viewed 488 times

gas mask case holder

IMG_8998.jpeg (52.44 KiB) Viewed 488 times

IMG_8989.jpeg (50.82 KiB) Viewed 488 times

Possible future addition subject to interest.

IMG_8978.jpeg (39.62 KiB) Viewed 488 times

IMG_9009.jpeg (50.82 KiB) Viewed 488 times

IMG_9017.jpeg (63.15 KiB) Viewed 488 times

IMG_9007.jpeg (145.17 KiB) Viewed 488 times

[Robert Tanzer]

These are like pictures from a jewelry store.
Mighty fine work here.

[John Fitzsimons]

Thanks Robert.

[John Fitzsimons]

I am also willing to assemble kits from third parties.

IMG_9035.jpeg (78.83 KiB) Viewed 448 times

IMG_9038.jpeg (75.28 KiB) Viewed 448 times

IMG_9037.jpeg (98.27 KiB) Viewed 448 times

IMG_9036.jpeg (75.72 KiB) Viewed 448 times

IMG_9032.jpeg (76.37 KiB) Viewed 448 times

IMG_9034.jpeg (68.55 KiB) Viewed 448 times

[John Fitzsimons]

IMG_9074.jpeg (41.94 KiB) Viewed 381 times

IMG_9115.jpeg (31.59 KiB) Viewed 381 times

[John Fitzsimons]

IMG_9010.jpeg (42.21 KiB) Viewed 379 times

IMG_8987.jpeg (37.37 KiB) Viewed 379 times

IMG_9113.jpeg (81.11 KiB) Viewed 379 times

IMG_9019.jpeg (31.92 KiB) Viewed 379 times

IMG_8997.jpeg (37.71 KiB) Viewed 379 times

[Tim Carr]

Outstanding workmanship!

Later Tim