Volume control

[Andrew Gaze]

I simple but very effective way to control volume from your transmitter.
A small length of brush cutter fuel hose as a coupling between a servo and the volume pot.
Works a treat

Probably been done before but I haven’t seen it.

[Gian Marco Menozzi]

hi,
in the Benedini commands,
command 11 and 12 are to control the volume
Marco

[Andrew Gaze]

hi,
in the Benedini commands,
command 11 and 12 are to control the volume
Marco

Hi Marco, I am not familiar with Benedini system.
Is that what Armortek use?
If so, how do I access the commands?

[Adrian Harris]

If you select Sound 11 via switch or encoder and keep triggering it, the volume will slowly decrease.
If you select Sound 12 via switch or encoder and keep triggering it, the volume will slowly increase.

Adrian.

[Gian Marco Menozzi]

hi,
in the Benedini commands,
command 11 and 12 are to control the volume
Marco

Hi Marco, I am not familiar with Benedini system.
Is that what Armortek use?
If so, how do I access the commands?

HI
Yes, the sound card ArmorTek uses is Benedini,
Adrian Harris explained how to do the commands,
Marco