My Leopard 2A4 track tension photos

[Chang]

Hi, I am really paying some attentions on the track tension. Here are some photos of my Leopard 2A4 (Chassis only , with 82 track links as the real tank).

No test driving yet. So far looks OK (to me ). Sorry about the painting .....

Right track. The space between the upper track and the bottom of the sponsons is very tight.

Leopard 2A4-34.JPG (78.3 KiB) Viewed 458 times

Same right track , with the side skirts down.

Leopard 2A4-40.JPG (58.57 KiB) Viewed 458 times

Middle section of the right track. See the track pad above the support roller almost touch the sponson. Is it OK?

Leopard 2A4-35.JPG (89.58 KiB) Viewed 458 times

Middle of the left track. Similar with the right track.

Leopard 2A4-36.JPG (101.19 KiB) Viewed 458 times

View from the left back.

Leopard 2A4-37.JPG (88.49 KiB) Viewed 458 times

View from the right back.

Leopard 2A4-38.JPG (76.84 KiB) Viewed 458 times

View from behind. I know the painting is not impressive....

Leopard 2A4-39.JPG (87.89 KiB) Viewed 458 times

Comments and suggestions are all welcome.

Regards,
Lerh Chang

[Martin Donnison]

Hi lerh, I recently asked this question and was told it should be between 10mm to 20mm measured on the middle at the top of the track. I set my tracks similar to yours and it didn’t sound right. I will drive it again with this measurement and let you know how it goes.

Thanks Martin.

[Martin Usher]

Chang, just a quick question, why 82 links not 81 as AT recommend ?

Martin.

[Chang]

Chang, just a quick question, why 82 links not 81 as AT recommend ?

Martin.

Hi Martin,
81 is Armortek's recommendation. 82 is the number of the real tank. I just wish to find out if 82 is OK too on 1/6 model. If it is not , I'll go down to 81.

With regards,
Lerh Chang

[Chang]

Just add some photos :

Hull top deck. Some minor details added.

Leopard 2A4-47.png (852.02 KiB) Viewed 53 times

Again , hull top deck. Turret ring shell guard updated.

Leopard 2A4-48.png (809.54 KiB) Viewed 53 times

Preliminary front interior concept layout. Sorry about the mess.

Preliminary rear interior concept layout. Cover net added on two speakers.

So far meet a small issue about the recoil gun barrel adaptor XRE028-Leo and Kian will help to sort it out.

Regards,
Lerh Chang