Power engine wire help

Forum for discussion relating to Tiger 1, Mid, Early, Late Production and Sturmtiger
KimLarsen
Posts: 28
Joined: Wed Oct 25, 2023 2:47 pm
Has liked: 1 time
Been liked: 4 times

Power engine wire help

Post by KimLarsen »

Can anybody help, where I connect these red, black and white wire?
it belongs to one of the two engines, but can't figure out where yo connect them.?
Attachments
IMG_20240613_173018_edit_138700306567898.jpg

User avatar
Dave Goodwin
Posts: 121
Joined: Sat Oct 21, 2023 3:01 pm
Location: Vermont, USA
Has liked: 27 times
Been liked: 121 times

Re: Power engine wire help

Post by Dave Goodwin »

Probably to one of the channels on the R/C receiver.

Stanislav Yanev
Posts: 18
Joined: Fri Apr 03, 2020 8:31 am
Has liked: 3 times
Been liked: 9 times

Re: Power engine wire help

Post by Stanislav Yanev »

if you really don't know where to connect these cables i suggest you to not do that, you will get very inguried. instead.if connected incorrectly, it can cause the engine to start immediately

User avatar
Jerry Carducci
Posts: 695
Joined: Sun Apr 05, 2020 7:38 pm
Location: The People's Paradise of California, the former Golden State
Has liked: 3 times
Been liked: 937 times
Contact:

Re: Power engine wire help

Post by Jerry Carducci »

Don't these things come with instructions?? Without going too far out on the limb I'd say that sort of connector (- + S) 'traditionally' has something to do with an interface to the RC system. These are seldom used for other purposes in RC models...

The unit looks suspiciously like a brushless motor speed control.

Get a copy of the instructions or message Armortek.
Jerry
http://tanks.linite.com/ - RC tanks: stay home, build a tank and save a life!

User avatar
Adrian Harris
Posts: 4986
Joined: Thu Jul 12, 2007 10:46 pm
Location: Berkshire (UK)
Has liked: 1261 times
Been liked: 1450 times

Re: Power engine wire help

Post by Adrian Harris »

On the Panther brushless motion pack "Wiring Schematics" page, those leads are marked as "RC IN" on the XMP101A and XMP101B main motor controllers and are shown going to Channel 2 and Channel 3 on the receiver, using "Y" splitter leads.

Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module

John Fitzsimons
Posts: 1761
Joined: Tue Dec 14, 2010 3:11 pm
Location: IRELAND,Dublin/Meath
Has liked: 4 times
Been liked: 488 times
Contact:

Re: Power engine wire help

Post by John Fitzsimons »

When setting up your electronics I suggest you have tracks raised off the ground. Motorcycle scissor lift is best and easiest option. Nothing worse than switching on and having something unexpected happen. I had my channels reversed for left and right track power. Almost drove off side of ramps. If tank is raised up you can change plugs in a safer way. Also power off before changing anything

KimLarsen
Posts: 28
Joined: Wed Oct 25, 2023 2:47 pm
Has liked: 1 time
Been liked: 4 times

Re: Power engine wire help

Post by KimLarsen »

Hello in here.
I have a Tiger 1 that teases. 🤔🤔🤔🤔🤔🤔
Is there anyone who can help me. I have bought a transmitter called RadioLink AT10II.
But the problem is that I can't get it to turn right or left. I've got it going back and forth.
I would like to be able to use only the right stick to steer.
I hope someone can help.?

User avatar
Steen Vøler
Posts: 768
Joined: Mon Nov 19, 2012 2:45 pm
Location: Denmark
Has liked: 62 times
Been liked: 495 times

Re: Power engine wire help

Post by Steen Vøler »

hi Kim,
where are you located? Your user name could indicate Denmark :-) but its not always the case.

If you are in Denmark, you could contact the danish armortek club - they drive regualery at the danish panzermuseumeast.dk
cheers
Steen

KimLarsen
Posts: 28
Joined: Wed Oct 25, 2023 2:47 pm
Has liked: 1 time
Been liked: 4 times

Re: Power engine wire help

Post by KimLarsen »

Thank you.

KimLarsen
Posts: 28
Joined: Wed Oct 25, 2023 2:47 pm
Has liked: 1 time
Been liked: 4 times

Re: Power engine wire help

Post by KimLarsen »

Hello.
Yes, I come from Denmark.
I hope there is someone who can help me 🙏🙏🙏🙏🙏🙏

Mark Heaps
Posts: 832
Joined: Sun Apr 03, 2016 3:39 pm
Location: Germany
Has liked: 263 times
Been liked: 309 times

Re: Power engine wire help

Post by Mark Heaps »

KimLarsen wrote:
Fri Jul 05, 2024 10:28 pm
Hello in here.
I have a Tiger 1 that teases. 🤔🤔🤔🤔🤔🤔
Is there anyone who can help me. I have bought a transmitter called RadioLink AT10II.
But the problem is that I can't get it to turn right or left. I've got it going back and forth.
I would like to be able to use only the right stick to steer.
I hope someone can help.?
Hi Kim,
Googling your transmitter shows it to be 12-channel, capable of telemetry and at a very affordable price, very nice.
It also found the manual in english ""
Section 3.2 could have the info you require to set it for single-stick driving, setting elevon mode.

KimLarsen
Posts: 28
Joined: Wed Oct 25, 2023 2:47 pm
Has liked: 1 time
Been liked: 4 times

Re: Power engine wire help

Post by KimLarsen »

Hello again.
I have bought new transmitter radiolink AT10II.
I can make it drive forward on pin 2 and backwards on pin 3 with the Højer connector. What if I have to turn right and left.
There can't be 3 roads on the same stick. How do I get the stick in Højer sid to control Højer and wait?????? 🤔🤔🤔🤔🤔🤔

KimLarsen
Posts: 28
Joined: Wed Oct 25, 2023 2:47 pm
Has liked: 1 time
Been liked: 4 times

Re: Power engine wire help

Post by KimLarsen »

Here are some pictures
Attachments
IMG_20240707_120242.jpg
IMG_20240707_120004_edit_473489099667852.jpg
IMG_20240707_115950_edit_473506525139204.jpg
IMG_20240707_115836_edit_473520848310035.jpg

Mark Heaps
Posts: 832
Joined: Sun Apr 03, 2016 3:39 pm
Location: Germany
Has liked: 263 times
Been liked: 309 times

Re: Power engine wire help

Post by Mark Heaps »

Hi Kim
Is it driving forwards and backwards on the same stick but you have no turn ?
Left stick or right stick ?

KimLarsen
Posts: 28
Joined: Wed Oct 25, 2023 2:47 pm
Has liked: 1 time
Been liked: 4 times

Re: Power engine wire help

Post by KimLarsen »

It runs forwards and backwards on the same pin I Højer pin.
But I would also like it to turn on the Højer stick.

Post Reply