I have a set of steel tracks fitted on my Panther that I need to take off to repair some tyres and possibly a bearing but not sure how to do it. The following is a picture shows how the links are connected :
Steel Tracks
-
Richard Goodwin
- Posts: 420
- Joined: Fri Mar 15, 2019 6:46 pm
- Has liked: 290 times
- Been liked: 283 times
Steel Tracks
Hi everyone.
I have a set of steel tracks fitted on my Panther that I need to take off to repair some tyres and possibly a bearing but not sure how to do it. The following is a picture shows how the links are connected : I believe thier to be a split pin behind the cap but not sure since I can’t remove the cap. Does anybody know about this type of track; grateful for any assistance. TIA
I have a set of steel tracks fitted on my Panther that I need to take off to repair some tyres and possibly a bearing but not sure how to do it. The following is a picture shows how the links are connected : I believe thier to be a split pin behind the cap but not sure since I can’t remove the cap. Does anybody know about this type of track; grateful for any assistance. TIA
-
David Brady
- Posts: 659
- Joined: Fri Aug 29, 2008 5:04 pm
- Location: Seaford East Sussex
- Has liked: 156 times
- Been liked: 682 times
-
Richard Goodwin
- Posts: 420
- Joined: Fri Mar 15, 2019 6:46 pm
- Has liked: 290 times
- Been liked: 283 times
Re: Steel Tracks
Hi Dave,
Many thanks for the reply.
Looks the same sort of track but I definitely have no visible pins.
Many thanks for the reply.
Looks the same sort of track but I definitely have no visible pins.
-
David Brady
- Posts: 659
- Joined: Fri Aug 29, 2008 5:04 pm
- Location: Seaford East Sussex
- Has liked: 156 times
- Been liked: 682 times
-
Paul McMartin
- Posts: 16
- Joined: Thu Dec 14, 2023 10:02 am
- Location: Queensland, Australia
- Has liked: 245 times
- Been liked: 75 times
Re: Steel Tracks
Are you sure they don't have roll pins. Look closely to see if there is a gap in the hole on the collar. If so, you will need a pin punch to remove.
- Roll pins.png (44.85 KiB) Viewed 321 times
-
Richard Goodwin
- Posts: 420
- Joined: Fri Mar 15, 2019 6:46 pm
- Has liked: 290 times
- Been liked: 283 times
Re: Steel Tracks
Thanks Dave and Paul for your suggestions.
Decided to initially apply a little heat and with a screwdriver, gently eased the cap off
If you look close enough, with the cap removed, you can see the end of a pin at the edge of the hole.
It seems a good way of doing it but it would mean carrying a blowtorch around in case you need to remove the track. There are pros and cons to the method!
Now for those much needed repairs
Decided to initially apply a little heat and with a screwdriver, gently eased the cap off
It seems a good way of doing it but it would mean carrying a blowtorch around in case you need to remove the track. There are pros and cons to the method!
Now for those much needed repairs
-
Adrian Harris
- Posts: 5025
- Joined: Thu Jul 12, 2007 10:46 pm
- Location: Berkshire (UK)
- Has liked: 1329 times
- Been liked: 1528 times
Re: Steel Tracks
A pin punch would be the ideal tool. You would need to support the track so that as much force as possible went onto the pin.
If doing it in the field, I would probably replace with a cotter pin until I could get it home.
Liam offered a choice of roll pin or split pit with his steel KT/JT tracks.
Adrian.
If doing it in the field, I would probably replace with a cotter pin until I could get it home.
Liam offered a choice of roll pin or split pit with his steel KT/JT tracks.
Adrian.
Contact me at sales@armortekaddict.uk for details of my smoker fan control module
-
Marco Peter
- Posts: 524
- Joined: Mon Feb 26, 2018 12:05 pm
- Has liked: 1322 times
- Been liked: 769 times
Re: Steel Tracks
One can only admire with awe the detail on those tracks... 
'Konan', my Tiger 1 Mid
'Gunther', my Panther G
'Gunther', my Panther G
-
Jae-seung Roe
- Posts: 70
- Joined: Wed Apr 27, 2022 4:08 am
- Location: Seoul, South Korea
- Has liked: 254 times
- Been liked: 128 times
-
Richard Goodwin
- Posts: 420
- Joined: Fri Mar 15, 2019 6:46 pm
- Has liked: 290 times
- Been liked: 283 times
-
Richard Goodwin
- Posts: 420
- Joined: Fri Mar 15, 2019 6:46 pm
- Has liked: 290 times
- Been liked: 283 times
Re: Steel Tracks
it is incredible.....trouble is, you have to get on ya knees to see itMarco Peter wrote: ↑Tue Oct 01, 2024 5:23 pmOne can only admire with awe the detail on those tracks...
